Lyxar Swimming Pool Robotic Vacuum Cleaners

Swimming Pool Robotic Vacuum Cleaners the default mode is automatic, however, this can be overridden by using the Remote Control. Once the Remote Control is not being used, the iCleaner 120 will return to automatic mode. Overall Cleaning- the iCleaner 120 not only cleans the bottom of a pool, but also cleans the wall, at the same time, the iCleaner-120 will filter the water, and the dirt will be collected into the Filter bag. (the default accuracy is 70um. Timing Cleaning- you can select one of three cleaning time with Remote Control (0.5 hr., 1 hr. or 2 hrs.). The iCleaner-120 will shut down when cycle time is over. Manual Cleaning- use the Remote Control to clean the specific area immediately. Self-protection out of the water- impeller decelerates to stop in one second while the iCleaner-120 will be pulling out the water, in case of personal injury. However, it is recommended that the power is switched off before removing the iCleaner-120 from the water. Stop protection- the iCleaner-120 will stop when the Impeller is retarded by foreign matter.Specifications: Frequency: 49.3-60.5Hz Optimum Working Temperature: 10-32 Degree C Storage Temperature: 0-40 Degree C Cleaning Speed: 0-120m2/h Recommended Cleaning Range: 100-200 m2 Voltage: 100-240VAC Additional Information Delivery Time Immediate Payment Terms T/T (Bank Transfer)